http://www.rollerhome.com/forums/ Forum Posts en-us http://www.rollerhome.com/forums/1/read/138#p180 2008-01-27 09:39:29 <p><em>Posted by: <a href='http://www.rollerhome.com/profiles/smirnus'>smirnus</a></em></p>I still have my 99 ST9's.  I bought some RB Access boots cheap because I wanted to swap the soulplates over for a UFS Conversion.   But then I cut off the toes and shaved down the sidewalls on the RB's , dyed the skins and put a small v-cut in the back.  Got my Matt Andrews Ables mounted but I cut off the protruding parts of the  h-block with a hacksaw so they sit flush with the bottom of the frame.  I bought some closeout 9mm's form skatepile but I've cracked two hubs already so I scored a set of Krypto Flat Roxx off ebay for $5 shipped.  Waiting on some Gen 2 liners to come in from ebay and looking for a heel pad that comes anywhere close to what salomon used.  <br><br>Will probably still convert the ST9's but I'll use a Razors Gen soulplate and mod them and  frames to run 61mm or bigger outside wheels.<br> 2008-01-27 09:39:29